CARRcrete PROhard is a high strength hybrid silicate and aqueous resin densifier and hardener for all cementitious surfaces, ideal for all concrete floors. PROhard densifies, hardens and internally seals concrete, terrazzo and cement based overlays.
We use this newly developed densifier on all of our polished concrete projects. The use of CARRcrete PROhard for concrete floors increases the gloss, strength and clarity of the polished surface - no project should be without it.
Our hybrid silicate and aqueous resin densifier is very easy to use and reacts instantly with the free lime within the surface to produce a much more abrasion resistance surface.
By fully saturating the surface for 30 minutes with our densifier you set into effect the conversion process which over time builds crystals within the substrate and in turn sealing from the inside out. The more you maintain the floor, the great the effect of the densifier.
Available in 5 Litre containers.
- Excellent results with soft concrete
- Rapid drying formula
- Increases surface density and abrasion resistance
- Increases gloss and clarity
- Begins internally sealing the concrete
- Coverage up to 30m2**
PROtip: Always fully saturate the substrate for around 30 minutes to take full advantage of the potential energy of the product. Then squeegee away excess before the product dries solid.
PROhard can set very hard, sometimes you will need to apply at an earlier stage for example after 80 grit metals or 50 grit resins.
**Coverage is down to how porous and dense the surface is. Very porous and weak surfaces will need more product. Always fully saturate the concrete surface to gain fullest effect.