CARRdiamond

PROfill - Pore Filler For Polished Concrete

  • Sale
  • Regular price £20.00


PROfill is a rapid setting, rapid hardening bug hole, aeration hole and pore filler for polished concrete projects. PROfill is ground into the surface with either 120 grit metals or with STI grout pans, this method of application forces air from the voids and replaces it with the strong and polishable PROfill formula.

Using PROfill increases surface integrity of the concrete surface, strengthening and repairing to increase overall gloss levels with greater clarity and stain resistance.

PROfill is part of CARRcrete InfinityFloor sytem and one of the reasons their system produces such amazing results.

 

Product Benefits

  • Fills small holes and pores that ruin polished concrete projects
  • Activated by water, no need for additional polymer
  • Strengthens concrete surface
  • Improves stain resistance
  • Improves overall gloss
  • Improves clarity of reflection
  • Easy to apply by grinding into surface or by hand trowel

 

How To Apply At 120 Grit Metal Stage

  • Ensure the floor is well cleaned and dust vacuumed
  • Dampen down concrete surface to prevent grout drying out
  • Whilst floor is damp (not wet) sprinkle a small amount of grout powder in front of grinder
  • Spray a fine mist of water over the grout powder
  • Run grinder slowly over the grout powder at low speed <500 rpm
  • Run forward and backwards for best filling technique
  • There should be a fine amount of filler left on the surface <1mm thick
  • Apply PROhard densifier once grout is dry
  • Allow to harden for at least 4 hours (overnight for best results)
  • Remove with your next set of tools

 

How To Apply With STI Grout Pans

  • Ensure the floor is well cleaned and dust vacuumed
  • Dampen down concrete surface to prevent grout drying out
  • Whilst floor is damp (not wet) sprinkle a small amount of grout powder in front of grinder
  • Spray a fine mist of water over the grout powder
  • Fit the STI Grout Pans
  • Run grinder slowly over the grout powder at low speed <500 rpm
  • Run forward and backwards for best filling technique
  • There should be a fine amount of filler left on the surface <1mm thick
  • Apply PROhard densifier once grout is dry
  • Allow to harden for at least 4 hours (overnight for best results)
  • Remove with your next set of tools